Last Updated on June 5, 2023 by Jorian
If your BrewStation is leaking, don’t worry, this is often an issue you can fix at home.
In this guide, we will explore the main reasons behind these leaks, whether they are occurring from the bottom or while dispensing coffee, and provide clear, step-by-step solutions to get your coffee maker back to its best.
How To Fix A Hamilton Beach Brewstation That Is Leaking?
The Hamilton Beach BrewStation may leak due to improper water tank connection, overflowing drip tray, loosened screws, internal damage, or issues with the coffee holder.
Remedies include cleaning the water tank and suction port with vinegar, emptying the drip tray regularly, tightening screws, and cleaning or replacing the coffee holder to prevent blockage.
Let’s dive into some more detail below!
Table of Contents
- How To Fix A Hamilton Beach Brewstation That Is Leaking?
- My Hamilton Beach Brewstation Is Leaking From The Bottom
- My Hamilton Beach Brewstation Is Leaking When Dispensing
My Hamilton Beach Brewstation Is Leaking From The Bottom
Here are a few fixes you can try when your BrewStation is leaking from the bottom:
The Water Tank Is Not Connecting Properly
There’s a water outlet at the bottom of the tank and a corresponding suction port on the machine where the tank attaches. Both of these parts can become blocked with mineral buildup. This can cause the water tank to not connect properly to the machine and result in a leak.
Here’s an easy fix: clean these parts with vinegar.
For the suction port on the machine, fill it with vinegar and let it soak for around 30 minutes. Meanwhile, for the water tank, scrub the bottom outlet with a toothbrush soaked in vinegar to dislodge any deposits.
After that, thoroughly rinse both parts with water. Once they’re clean, reassemble the machine and run a few cycles with just water to ensure all the vinegar is washed away.
Doing this can often stop leaks coming from the water tank. Regular checks and cleaning can help prevent this problem in the future.
A Full Drip Tray
The drip tray on a Hamilton Beach Brewstation is quite small, so it can fill up quickly with water and overflow on the countertop.
Always keep an eye on the water level and empty it before it leaks.
The Screws Need To Be Tightened
Over time and with regular use, the screws that hold your BrewStation together can gradually loosen and if they become too loose, they may lead to leakages. This is a common occurrence in many appliances.
One of the common places you might find these leakages is around the area where the brewing tank connects with the dispensing spout or the coffee reservoir. If the screws in these areas are not tight, water or coffee might escape through the small gaps created, leading to the leaks you’ve noticed.
Using the appropriate screwdriver (typically a Phillips head) go around the appliance, paying particular attention to the base, the brewing tank, and the reservoir. If you notice any screws that aren’t tight, gently rotate them clockwise to tighten them.
Remember, the goal is to snug them up, not to overtighten as this can strip the threads and cause more harm than good.
Something Inside The Machine Is Broken
A common reason behind leaks in your Hamilton Beach BrewStation can be internal damage, such as a hole in a tube or a loose connection. This may occur due to normal wear and tear or from mishandling.
- Holes in a Tube: The BrewStation has several internal tubes that transport water and coffee throughout the machine. If a hole forms in one of these tubes, it could cause leaking. Typically, these holes are the result of long-term use or accidental damage.
- Loose Tubes: Similarly, these tubes can sometimes come loose from their connections. This could be due to the machine being moved roughly, or the connections simply weakening over time. If a tube is not securely attached, it can cause coffee or water to leak from the machine.
In both scenarios, the fixes can be a bit complex for the average coffee enjoyer. The internal design of the BrewStation can be difficult to navigate without the right tools and knowledge.
So, if you’re not comfortable disassembling your BrewStation or you’re not particularly handy, it’s probably best to reach out to Hamilton Beach’s customer support.
In some cases, if the BrewStation is still under warranty, they may even replace the unit or the broken component at no charge.
My Hamilton Beach Brewstation Is Leaking When Dispensing
Here are a few fixes you can try when your BrewStation is leaking when dispensing coffee:
The Coffee Holder Needs Cleaning
The coffee holder accumulates coffee residue and mineral deposits over time, which can potentially cause leakage due to disrupted water flow. Here’s a simplified guide to cleaning it effectively:
- First, open the coffee holder.
- Create a cleaning solution by mixing water and vinegar.
- Use a toothbrush to scrub off the majority of the residue inside the holder. The vinegar solution will help loosen the grime.
- After scrubbing, wipe the interior of the coffee holder with a paper towel to remove any remaining loose deposits.
- Once you’ve scrubbed and wiped, prepare a mixture of baking soda and warm water. Fill the coffee holder with this mixture and let it sit for about an hour. The baking soda will work to dissolve any remaining residue.
- After an hour, rinse the coffee holder thoroughly with water.
Additionally, you can run a descale cycle with some vinegar, here is a video on how to do that:
Your coffee holder should now be clean and ready for use again!
Replace The Coffee Holder
If your brew station continues to leak when dispensing coffee, even after cleaning the coffee holder, it’s possible that a part inside the coffee holder is broken.
The repeated heating and cooling from brewing coffee can wear out the plastic over time. During cleaning, you may have noticed cracks in the plastic. If that’s the case, no amount of cleaning will stop the leak.
Don’t worry, there’s a simple solution. You can find a reasonably priced replacement coffee holder on eBay. This should effectively fix any leaks.
A leaking Hamilton Beach BrewStation can be a nuisance, but it’s often a fixable issue.
By regularly maintaining and cleaning your machine, tightening any loose screws, and monitoring for potential internal damage, you can often avoid leaks altogether. And, if a replacement part is needed, these are often readily available.
With these simple steps, you can extend the lifespan of your BrewStation and keep enjoying your favorite coffee brews.
Thanks for Reading!